Enable Dynamic Channel Switching (DCS) to dynamically select and switch channels
based on specified criteria.
-
Go to .
-
Select an existing radio
profile,and then select
, or select 
.
-
Enable Dynamic
Channel Switching.
-
Select Automatically select and switch channels during specified
time interval.
-
In the From field, enter the start time for the
interval.
-
In the To field, enter the end time for the
interval.
-
In the Do not switch
channels if the number of connected clients exceeds
field, specify the number of connected clients.
If the number of associated clients is equal to or less than the
specified value, and if the AP finds a better channel, it can switch
to a new channel. Associated clients lose their connections and must
reconnect. If the number of clients exceeds the value, the AP does
not switch to a new channel. When a client de-authenticates during
the scheduled time range, the AP checks the number of clients
against the value. If the number of clients does not exceed the
value, the AP switches channels. If the number of clients still
exceeds the value, the AP does not change channels.
-
Select Switch channels anytime if RF interference exceeds the
threshold.
-
In the Interference Threshold field, enter the
value (%).
-
In the CRC Error Threshold field, enter the
value (%).
-
Select Do not switch channels if clients are
connected
-
Select SAVE RADIO
PROFILE.
| 
