|
Home > Manage > Devices > Device Details Panel > Device Details Configuration Tasks > Configure AP Devices > AP Interface Settings
Logo

AP Interface Settings

Use this task to view Device Template Default Settings and control actions for Wireless (Wi-Fi) and Wired (Ethernet) ports.
Note

Note

Changes made here are at the device level, which overrides the network policy template for the device only. The Network Policy remains unchanged.
  1. Go to Manage > Devices and select the host name of the AP in the Devices list.
  2. From the Device Details left pane, select Configure > Interface Settings.
  3. For Wireless Interfaces, select either the WiFi0, WiFi1, WiFi2, BLE, or IoT0 tab.
    Note

    Note

    The IoT0 tab is supported on AP5010/AP5020 models.
  4. To configure WiFi0, WiFi1, WiFi2, or IoT0, see Configure WiFi Settings.
  5. To configure BLE, see Configure BLE Service Settings.
    For more information about the BLE service, see Configure the BLE Service.
  6. For Wired Interfaces, see Configure Wired Interfaces Settings.
  7. Select Save Interface Settings.

Copyright © 2026 Extreme Networks. All rights reserved. Published February 17, 2026.