Online Help Version 25.7.0

The VLAN probe action locates available VLANs for the selected device. When the VLAN probe is complete, a table shows the host name, MAC address, available VLANs, unavailable VLANs, and their status.

Note

The VLAN Probe Utility is also available from the Device List for a connected device.

Use this task to verify the VLAN probe results and status of VLAN for selected device.

Go to Manage > Real Time Maps.
From the Global View location list, select a floor or use the Search field to search for a specific site, building, or floor.

Note
The Search field helps you find a specific location in a large network. Enter the first few characters to see a list of locations. The more characters you enter, the more precise the search results will be.

Note
The selected floor must include a floor plan. For more information, see Add a Floor Plan.
Select a connected device from the floor plan, and then select the Actions tab.

Select VLAN Probe or Switch VLAN Probe, and configure the VLAN Probe settings.

Table 1. VLAN Probe Settings
Field	Description
VLAN Range	The start and end VLAN Range to probe. You can enter up to five ranges separated by commas, up to a total range of 12. However, range numbers cannot overlap. For example, `1, 2-7, 8, 8-12`.
Probe Retries (AP devices only)	The number of attempts made to send a probe to verify the status of a VLAN.
Timeout	The timeout from 5 to 60 seconds to specify how long to wait for a reply from each probe.

Select Start to start a probe.
Select Stop to stop a probe before it is complete.

	\|
Home > Manage > Real Time Maps > Device Summary and Actions Menu > VLAN Probe from Real Time Maps

VLAN Probe from Real Time Maps